.png)
Discover valuable information including standard tables, formulas, calculations, and design criteria, which are crucial for engineering purposes.
Beam Calculations
In constructions, beam calculations are one of the most important principles. Classical beam is consisting of one side fixed and other is moveable. To Continue -->
Static Sim. - Beam Simulation
Beam Analysis is a time-independent analysis method performed using the finite element method, enabling the prevention of errors during the design phase. Read More -->
Important Formulas
This section presents some important formulas used in engineering. Read More -->
Flange Pressure Values with Temperatures
Flange pressure values with increasing temperature and with different material types. To Continue -->
Venturimeter
Venturimeters are devices that measure the flow rate of fluids passing through pipes. These mechanisms aim to determine the volumetric flow rate of fluids flowing at different speeds. To Continue -->
Cyclone Calculations
Performance of Cyclone can be determined via its duct collecting efficiency and pressure drop. Design criteria of cyclone can be high efficiency or high capacity. To Continue -->
Dry Air Properties
Properties of dry air such as density, viscosity and thermal conductivity at different temperatures can be used in all processes. Dry air properties from -70 °C to 1620 °C...
Metric Thread Dimension table is a must in an engineer's go-book. To Continue -->
Metric Thread Dimensions
The open area calculation of perforated sheets
The open area calculation of perforated sheets determines the ratio of the total area of the holes on the sheet surface to the total surface of the sheet. To Continue -->
Pressure Vessels
Pressure vessels, which are indispensable components of industrial facilities, are of critical importance in terms of safety and efficiency. To Continue -->
Fixed Ladder Standards
In this section there is criterio for designing deck ladder standarts. To Continue -->
Shaft Keys are machine parts that can connect shafts and gears, pulley etc. detachably and transfers the motion...
​
Standard Keyway Tables
Standard Bolts and Dimensions
Bolts are one of the parts that engineers used the most. To Continue -->
Unit Converter
Comprehensive Unit Converter: Easily calculate all basic and technical measurements. [Continue -->]
.png)
Sheet Metal Design Guide
We are here for those who want to learn in-depth about sheet metal design and manufacturing!
